Stamps.com Stamps printer is not working

Stamps.com Stamps printer is not working

Printer model is Stamps.com ProLabel II Select  ( ONYX ProLabel II Select)
Uninstall the printer driver + restart the computer
Re- install the printer driver https://store.stamps.com/pages/drivers
If the printer has been printing incorrectly,  Re-calibrate the Printer:
Power on the printer and load your labels. Press and hold the feed button for 6-8 seconds until the light flashes or the printer clicks and feeds a few labels (1-2 Stamps) and Test printing
If the printer continues to skip labels or misalign, the media sensor may be dirty.
Turn off the printer, open it, and clean the sensor with a lint-free cloth or cotton swab dipped in isopropyl alcohol and test printing
If Printer kept printing in a wrong size and off to side 
Follow the on screen instructions and keep adjusting the printing settings:
keep the portrait, scale at 90 % on the reprint.

    • Related Articles

    • Printer Timeout Increase Settings

      Below are some instructions for extending the sleep timeout on the Xerox B620 and the B410. Omit step 5 in this KB Article https://www.support.xerox.com/en-us/article/KB0133316 In the top left corner of the control panel touch screen, select Log In ...

    • Setting up the Exhibit Sticker Program in Adobe (Works in Pro AND Reader)

      Attached are instructions from our lead Paralegal regarding Exhibit Stickers in Adobe. Instructions for setting up the Exhibit Sticker program in Adobe (works in Pro AND Reader) Step 1 Open up your first pdf exhibit Step 2 To set the preferences for ...